Dial tone

Dial tone

A dial tone (known in the British Isles as a dialling tone)[1] is a telephony signal used to indicate that the telephone exchange is working, has recognized an off-hook, and is ready to accept a call. The tone stops when the first numeral is dialed. If no digits are forthcoming, the permanent signal procedure is invoked, often eliciting a special information tone.

Contents

History

In the early days of telephony a telephone operator would answer when a subscriber picked up the telephone to make a call. When operators were replaced by automated systems an automatically generated tone was substituted to signify that the system was live and a call could be dialed. It was required to pick up the receiver (go off-hook) before dialing, and each digit was transmitted as it was dialed. This is unlike modern telephones, which also allow dialing a number without the need to first go off-hook. The telephone stores the digits as they are dialed, and only goes off-hook and actually sends the digits when the subscriber presses a "Call" or "Talk" button.

In the United States, dial tone was introduced in the 1940s, and became widespread in the 1950s. When President Dwight D. Eisenhower retired in 1961 it was nearly universal, but the president himself had not been confronted with a dial tone. When he picked up his own household phone his assistant had to explain what the strange noise was, as well as how to use a rotary phone dial.[2]

Before modern electronic telephone switching systems came into use, dial tones were usually generated by electromechanical means; in the United States, the standard "city" dial tone consisted of a 600 Hz tone amplitude-modulated at 120 Hz. Some dial tones were simply adapted from 60 Hz AC line current. In the UK, the standard Post Office dial tone was 330 Hz: this was generated by a motor-driven ringing machine in most exchanges, and by a vibrating-reed generator in the smaller ones.

The modern dial tone varies between countries, being a "buzz" of two interfering tones (350 Hz and 440 Hz, as defined in the Precise Tone Plan) in the North American Numbering Plan (most of North America), and a constant single tone (425 Hz) in most of Europe. Modems, fax machines, and autodialers must be designed to recognise these so-called call-progress tones, as well as comply with differing standards and regulations.

Dial tones are not relevant to mobile phones, and mobile phone subscribers will never hear a dial-tone. Subscribers place a call much like they would with a modern telephone, by dialing the digits and pressing a "Call" or "Talk" button. If the mobile subscriber is connected to a mobile network, then the call will be placed.

Experienced musicians will be able to tune their stringed instruments to a US dial tone, since its two frequencies correspond to the standard concert pitch of A440, and (approximately) the "F".

Variants

Second dial tone

Private or internal PBX or key phone systems also have their own dial tone, sometimes the same as the external PSTN one, and sometimes different to remind users to dial a prefix for—or select in another way—an outside telephone line.

Secondary dial tone

A secondary dial tone, or second dial tone, is a dial tone-like sound presented to the caller after a call has already been set up. Secondary dial tones are often used in call queuing and call forwarding systems.

Unlike a normal dial tone, a secondary dial tone is provided when a connection has already been established and, except for free calls, is being charged for. Systems using secondary dialtone have been criticized for misleading callers into thinking that they are not yet being charged.

Stutter dial tone

A "stuttered" or interrupted dial tone is often used to indicate that voice mail is waiting (see Message Waiting Indicator), or that a calling feature such as call forwarding has been activated.

"Soft" dial tones

A "soft" dial tone, less often called "secondary" dial tone or "express" dial tone, is audibly the same as a regular one, except that there is no actual service active on the line, and normal calls cannot be made. It is maintained only so that an attached phone can dial the emergency telephone number (such as 9-1-1, 1-1-2 or 9-9-9), in compliance with the law in most places. It can sometimes call the business office of the local exchange carrier which owns or last leased the line, such as via 6-1-1. Other functions such as ringback or ANAC may also be accessed by technicians in order to facilitate installation or activation.

Often, a new telephone number is assigned to the line so that it can function, but callback is restricted, and end-users do not know the number. These numbers may be outside the normal range used for regular lines, potentially causing trouble when telephone numbering plans are changed.

Deactivated lines can also be maintained with no dial tone at all, while still connected to and powered by the switch, in a state sometimes called INB or Installation Busy.

See also

References

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • dial tone — UK US noun [C] US COMMUNICATIONS ► DIALLING TONE(Cf. ↑dialling tone): »Pick up the receiver then wait for the dialling tone …   Financial and business terms

  • dial tone — dial tones N COUNT The dial tone is the same as the dialling tone. [AM] …   English dictionary

  • dial tone — n AmE the sound you hear when you pick up the telephone that lets you know that you can make a call British Equivalent: dialling tone …   Dictionary of contemporary English

  • dial tone — dial ,tone noun count AMERICAN the sound a telephone makes when you pick it up to show that you can make a call …   Usage of the words and phrases in modern English

  • dial tone — ☆ dial tone n. a buzzing or humming sound indicating to the user of a telephone that the line is open and a number may be dialed …   English World dictionary

  • dial tone — n. A metaphor for any service that provides easy, universal access to some other product or service using a variety of devices and regardless of location. Example Citation: This will lead to the Internet dial tone , in which connection to the Net …   New words

  • dial tone — noun : a characteristic tone emitted by a dial telephone as a signal that the system is ready for dialing * * * noun, pl ⋯ tones [count] US : the sound that comes from a telephone when it is ready for a call to be made called also (Brit) dialling …   Useful english dictionary

  • Dial Tone (G.I. Joe) — Dial Tone is code name of two fictional characters from the G.I. Joe: A Real American Hero toyline, comic books and cartoon series. The first is male and debuted in 1986. He is the G.I. Joe Team s communications expert. He is voiced by Hank… …   Wikipedia

  • dial tone — tone on a telephone receiver indicating that the system is ready for dialing …   English contemporary dictionary

  • dial tone — The sound that is on the phone line when the phone is picked up if it is ready to have an outgoing call made. Your modem, if it can dial, should understand this tone …   Dictionary of telecommunications

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”