Hamilton's principle

Hamilton's principle

In physics, Hamilton's principle is William Rowan Hamilton's formulation of the principle of stationary action (see that article for historical formulations). It states that the dynamics of a physical system is determined by a variational problem for a functional based on a single function, the Lagrangian, which contains all physical information concerning the system and the forces acting on it. The variational problem is equivalent to and allows for the derivation of the "differential" equations of motion of the physical system. Although formulated originally for classical mechanics, Hamilton's principle also applies to classical fields such as the electromagnetic and gravitational fields, and has even been extended to quantum mechanics, quantum field theory and criticality theories.

Mathematical formulation

Hamilton's principle states that the true evolution mathbf{q}(t) of a system described by N generalized coordinates mathbf{q} = left( q_{1}, q_{2}, ldots, q_{N} ight) between two specified states mathbf{q}_{1} stackrel{mathrm{def{=} mathbf{q}(t_{1}) and mathbf{q}_{2} stackrel{mathrm{def{=} mathbf{q}(t_{2}) at two specified times t_{1} and t_{2} is an extremum (i.e., a stationary point, a minimum, maximum or saddle point) of the action functional

:mathcal{S} [mathbf{q}] stackrel{mathrm{def{=} int_{t_{1^{t_{2 L(mathbf{q}(t),dot{mathbf{q(t),t), dt

where L(mathbf{q},dot{mathbf{q,t) is the Lagrangian function for the system. In other words, any "first-order" perturbation of the true evolution results in (at most) "second-order" changes in mathcal{S}. It should be noted that the action mathcal{S} is a functional, i.e., something that takes as its input a function and returns a single number, a scalar. In terms of functional analysis, Hamilton's principle states that the true evolution of a physical system is the solution of the functional equation :frac{delta mathcal{S{delta mathbf{q}(t)}=0

Euler-Lagrange equations for the action integral

Requiring that the true trajectory mathbf{q}(t) be a stationary point of the action functional mathcal{S} is equivalent to a set of differential equations for mathbf{q}(t) (the Euler-Lagrange equations), which may be derived as follows.

Let mathbf{q}(t) represent the true evolution of the system between two specified states mathbf{q}_{1} stackrel{mathrm{def{=} mathbf{q}(t_{1}) and mathbf{q}_{2} stackrel{mathrm{def{=} mathbf{q}(t_{2}) at two specified times t_{1} and t_{2}, and let oldsymbolvarepsilon(t) be a small perturbation that is zero at the endpoints of the trajectory

:oldsymbolvarepsilon(t_{1}) = oldsymbolvarepsilon(t_{2}) stackrel{mathrm{def{=} 0

To first order in the perturbation oldsymbolvarepsilon(t), the change in the action functional deltamathcal{S} would be:delta mathcal{S} = int_{t_{1^{t_{2; left [ L(mathbf{q}+oldsymbolvarepsilon,dotmathbf{q} +dotoldsymbolvarepsilon)- L(mathbf{q},dotmathbf{q}) ight] dt = int_{t_{1^{t_{2; left(oldsymbolvarepsilon cdot frac{partial L}{partial mathbf{q + dotoldsymbolvarepsilon cdot frac{partial L}{partial dotmathbf{q ight),dt

where we have expanded the Lagrangian "L" to first order in the perturbation oldsymbolvarepsilon(t).

Applying integration by parts to the last term results in

:delta mathcal{S} = left [ oldsymbolvarepsilon cdot frac{partial L}{partial dotmathbf{q ight] _{t_{1^{t_{2 + int_{t_{1^{t_{2; left( oldsymbolvarepsilon cdot frac{partial L}{partial mathbf{q- oldsymbolvarepsilon cdot frac{d}{dt} frac{partial L}{partial dotmathbf{q ight),dt

The boundary conditions oldsymbolvarepsilon(t_{1}) = oldsymbolvarepsilon(t_{2}) stackrel{mathrm{def{=} 0 causes the first term to vanish

:delta mathcal{S} = int_{t_{1^{t_{2; oldsymbolvarepsilon cdotleft(frac{partial L}{partial mathbf{q - frac{d}{dt} frac{partial L}{partial dotmathbf{q ight),dt

Hamilton's principle requires that this first-order change delta mathcal{S} is zero for all possible perturbations oldsymbolvarepsilon(t), i.e., the true path is a stationary point of the action functional mathcal{S} (either a minimum, maximum or saddle point). This requirement can be satisfied if and only if

: frac{partial L}{partial mathbf{q - frac{d}{dt}frac{partial L}{partial dotmathbf{q = 0 Euler-Lagrange equations

These equations are called the Euler-Lagrange equations for the variational problem.

The conjugate momentum p_{k} for a generalized coordinate q_{k} is defined by the equation p_{k} stackrel{mathrm{def{=} frac{partial L}{partialdot q_{k.

An important special case of these equations occurs when "L" does not contain a generalized coordinate q_{k} explicitly, i.e.,

: if frac{partial L}{partial q_{k=0, the conjugate momentum p_{k} stackrel{mathrm{def{=} frac{partial L}{partialdot q_{k is constant.

In such cases, the coordinate q_{k} is called a cyclic coordinate. For example, if we use polar coordinates "t, r, θ" to describe the planar motion of a particle, and if "L" does not depend on "θ", the conjugate momentum is the conserved angular momentum.

Example: Free particle in polar coordinates

Trivial examples help to appreciate the use of the action principle via the Euler-Lagrangian equations. A free particle (mass "m" and velocity "v") in Euclidean space moves in a straight line. Using the Euler-Lagrange equations, this can be shown in polar coordinates as follows. In the absence of a potential, the Lagrangian is simply equal to the kinetic energy : L = frac{1}{2} mv^2= frac{1}{2}m left( dot{x}^2 + dot{y}^2 ight)in orthonormal ("x","y") coordinates, where the dot represents differentiation with respect to the curve parameter (usually the time, "t").In polar coordinates ("r", φ) the kinetic energy and hence the Lagrangian becomes

: L = frac{1}{2}m left( dot{r}^2 + r^2dotvarphi^2 ight).

The radial "r" and φ components of the Euler-Lagrangian equations become, respectively

: frac{d}{dt} left( frac{partial L}{partial dot{r ight) - frac{partial L}{partial r} = 0 qquad Rightarrow qquad ddot{r} - rdot{varphi}^2 = 0 : frac{d}{dt} left( frac{partial L}{partial dot{varphi ight) -frac{partial L}{partial varphi} = 0 qquad Rightarrow qquad ddot{varphi} + frac{2}{r}dot{r}dot{varphi} = 0.

The solution of these two equations is given by

: rcosvarphi = a t + b : rsinvarphi = c t + d

for a set of constants "a, b, c, d" determined by initial conditions.Thus, indeed, "the solution is a straight line" given in polar coordinates.

Comparison with Maupertuis' principle

Hamilton's principle and Maupertuis' principle are occasionally confused and both have been called (incorrectly) the principle of least action. They differ in three important ways:
* "their definition of the action..." :::Maupertuis' principle uses an integral over the generalized coordinates known as the abbreviated action mathcal{S}_{0} stackrel{mathrm{def{=} int mathbf{p} cdot dmathbf{q} where mathbf{p} = left( p_{1}, p_{2}, ldots, p_{N} ight) are the conjugate momenta defined above. By contrast, Hamilton's principle uses mathcal{S}, the integral of the Lagrangian over time.

*"the solution that they determine...":::Hamilton's principle determines the trajectory mathbf{q}(t) as a function of time, whereas Maupertuis' principle determines only the shape of the trajectory in the generalized coordinates. For example, Maupertuis' principle determines the shape of the ellipse on which a particle moves under the influence of an inverse-square central force such as gravity, but does not describe "per se" how the particle moves along that trajectory. (However, this time parameterization may be determined from the trajectory itself in subsequent calculations using the conservation of energy.) By contrast, Hamilton's principle directly specifies the motion along the ellipse as a function of time.

*"...and the constraints on the variation.":::Maupertuis' principle requires that the two endpoint states q_{1} and q_{2} be given and that energy be conserved along every trajectory. By contrast, Hamilton's principle does not require the conservation of energy, but does require that the endpoint times t_{1} and t_{2} be specified as well as the endpoint states q_{1} and q_{2}.

Action principle for classical fields

The action principle can be extended to obtain the equations of motion for fields, such as the electromagnetic field or gravity.

The Einstein equation utilizes the "Einstein-Hilbert action" as constrained by a variational principle.

The path of a body in a gravitational field (i.e. free fall in space time, a so called geodesic) can be found using the action principle.

Action principle in quantum mechanics and quantum field theory

In quantum mechanics, the system does not follow a single path whose action is stationary, but the behavior of the system depends on all imaginable paths and the value of their action. The action corresponding to the various paths is used to calculate the path integral, that gives the probability amplitudes of the various outcomes.

Although equivalent in classical mechanics with Newton's laws, the action principle is better suited for generalizations and plays an important role in modern physics. Indeed, this principle is one of the great generalizations in physical science. In particular, it is fully appreciated and best understood within quantum mechanics. Richard Feynman's path integral formulation of quantum mechanics is based on a stationary-action principle, using path integrals. Maxwell's equations can be derived as conditions of stationary action.

References

* W.R. Hamilton, "On a General Method in Dynamics.", "Philosophical Transaction of the Royal Society" [http://www.emis.de/classics/Hamilton/GenMeth.pdf Part I (1834) p.247-308] ; [http://www.emis.de/classics/Hamilton/SecEssay.pdf Part II (1835) p. 95-144] . ("From the collection [http://www.emis.de/classics/Hamilton/ Sir William Rowan Hamilton (1805-1865): Mathematical Papers] edited by David R. Wilkins, School of Mathematics, Trinity College, Dublin 2, Ireland. (2000); also reviewed as [http://www.maths.tcd.ie/pub/HistMath/People/Hamilton/Dynamics/ On a General Method in Dynamics] ")

* Goldstein H. (1980) "Classical Mechanics", 2nd ed., Addison Wesley, pp. 35-69.

* Landau LD and Lifshitz EM (1976) "Mechanics", 3rd. ed., Pergamon Press. ISBN 0-08-021022-8 (hardcover) and ISBN 0-08-029141-4 (softcover), pp.2-4.

* Arnold VI. (1989) "Mathematical Methods of Classical Mechanics", 2nd ed., Springer Verlag, pp. 59-61.


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Hamilton variation principle — Hamiltono variacinis principas statusas T sritis fizika atitikmenys: angl. Hamilton variation principle vok. Hamiltonsches Variationsprinzip, n rus. вариационный принцип Гамильтона, m pranc. principe variationnel d’Hamilton, m …   Fizikos terminų žodynas

  • Principle of least action — This article discusses the history of the principle of least action. For the application, please refer to action (physics). In physics, the principle of least action or more accurately principle of stationary action is a variational principle… …   Wikipedia

  • Hamilton , Sir William Rowan — (1805–1865) Irish mathematician Hamilton was a child prodigy, and not just in mathematics; he also managed to learn an extraordinary number of languages, some of them very obscure. In 1823 he entered Trinity College in his native city of Dublin,… …   Scientists

  • Hamilton–Jacobi equation — In physics, the Hamilton–Jacobi equation (HJE) is a reformulation of classical mechanics and, thus, equivalent to other formulations such as Newton s laws of motion, Lagrangian mechanics and Hamiltonian mechanics. The Hamilton–Jacobi equation is… …   Wikipedia

  • Hamilton, Alexander — born Jan. 11, 1755/57, Nevis, British West Indies died July 12, 1804, New York, N.Y., U.S. U.S. statesman. He first came to the U.S. in 1772, arriving in New Jersey. In the American Revolution he joined the Continental Army and showed conspicuous …   Universalium

  • Principle of individuation — The Principle of Individuation is a criterion which supposedly individuates or numerically distinguishes the members of the kind for which it is given, i.e. by which we can supposedly determine, regarding any kind of thing, when we have more than …   Wikipedia

  • Maupertuis' principle — In classical mechanics, Maupertuis principle (named after Pierre Louis Maupertuis) is an integral equation that determines the path followed by a physical system without specifying the time parameterization of that path. It is a special case of… …   Wikipedia

  • D'Alembert's principle — Classical mechanics Newton s Second Law History of classical mechanics  …   Wikipedia

  • Luke's variational principle — In fluid dynamics, Luke s variational principle is a Lagrangian variational description of the motion of surface waves on a fluid with a free surface, under the action of gravity. This principle is named after J.C. Luke, who published it in 1967 …   Wikipedia

  • Gauss' principle of least constraint — The principle of least constraint is another formulation of classical mechanics enunciated by Carl Friedrich Gauss in 1829.The principle of least constraint is a least squares principle stating that the true motion of a mechanical system of N… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”