Class (locomotive)

Class (locomotive)

Class (locomotive) refers to a group of locomotives built to a common design for a single railroad. Often members of a particular class had detail variations between individual examples, and these could lead to subclasses. Sometimes technical alterations (especially rebuilding, superheating, re-engining, etc) move a locomotive from one class to another. Different railways had different systems, and sometimes one railway (or its successors) used different systems at different times and for different purposes, or applied those classifications inconsistently. Sometimes therefore it is not clear where one class begins and another ends. The result is a classic example of the Lumper splitter problem.

Contents

Development

As locomotives became more numerous the need arose to deal with them in groups of similar engines rather than as named or numbered individuals. These groups were named "classes" and at first tended to reflect capability rather than design. For example, the Baltimore and Ohio Railroad grouped its roster into four classes before the Civil War, though they had by that point dozens of different designs.

Later classes were based on design. A group of locomotives built off the same blueprints constituted a class, and if some of the locomotives in the class were sufficiently modified, a new class might be established for the modified examples. When electric locomotives were introduced, the same scheme was applied to them.

Since steam and early electric locomotives were usually custom built, classes were assigned by the railroad, and each railroad had its own system. Mergers of lines and sales of locomotives brought about changes of class. Early diesels were often fitted into the locomotive class system, but since they were generally not custom built the use of manufacturer model designations overtook the class system and made it irrelevant, except for historical discussion.

Class system organization

Usually the class system for a railroad was built on a simply hierarchy which assigned each class a code.

First level: Wheel arrangement

The first level was usually for the wheel arrangement and was usually coded by a letter of the alphabet. Different railroads used different codes, so that "J" on the New York Central Railroad meant a 4-6-4 (Hudson), while on the Norfolk and Western Railway it mean a 4-8-4 (Northern), and on the Baltimore and Ohio Railroad it denoted a 4-4-0 with a Wootten firebox.

Articulated locomotives were handled through two different methods. On many railroads each wheel arrangement was assigned its own unique letter, due to the limited number of arrangements that had to be represented. On other railroads this was insufficient, and commonly articulated locomotives were represented with a two letter code, one letter for the arrangement of each half. Therefore the Pennsylvania Railroad GG1 (UIC 2Co+Co2) is represented as if it were two ten-wheelers (4-6-0) coupled tail-to-tail.

Second level: Sequential model

A sequence number was often added to distinguish different designs of the same wheel arrangement. As a rule the first design for a given arrangement had no sequence number, so that numbering stated at 1 with the second design for the wheel arrangement. For example, there were two main classes of 2-10-2 locomotives on the B&O, labelled "S" and "S-1".

Third level: Variants

Letter suffixes were often used to indicate variants in a basic design. Sometimes these also referred to specific characteristics; for example, for many years the Pennsylvania Railroad used a "s" suffix to indicate superheating, while on the B&O a "t" suffix indicated an engine with an oversize tender.

Class Names

Most locomotives were given simple codes, but some classes were named, formally or not.

  • The Union Pacific Big Boy class was said to have been given that name when it was scrawled on the smokebox of one at the factory.
  • The Baltimore and Ohio Railroad P-7 class was referred to as the "President" class because initially each locomotive had the name of a U.S. President on the cab.
  • Also on the B&O, the S and S-1 classes were referred to as "Big Sixes" because the road numbers began with 6.

British Practice

The old railway companies had various different systems of classification. Taking the "Big Four" companies which operated from 1923 to 1947:

Great Western Railway

The class number was usually taken from the first member of each class, e.g. "5700 Class" or "57XX Class" for locomotives in the number series beginning 5700.

Southern Railway

Each class was given a letter or number but these were not very meaningful. For example, the "700" Class was a 0-6-0 and the "Q" Class was also a 0-6-0. See:

London, Midland and Scottish Railway

Each locomotive was given a power classification, e.g. "3F". However, many different classes would have the same power classification so this was not helpful for identifying classes.

London and North Eastern Railway

The LNER's classification system was the most helpful to railway enthusiasts. Each wheel arrangement was given a letter (e.g. A for 4-6-2, B for 4-6-0, etc.) and this was followed by a number denoting the class (e.g. A1, B1, etc.).

German practice

See also


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • New South Wales AD60 class locomotive — New South Wales AD60 class Beyer Garratt 6012 tops the grade at Cowan with a goods train bound for Sydney. Power type Steam Builder Beyer, Peacock and Company Serial number …   Wikipedia

  • New South Wales 48 class locomotive — New South Wales 48 class GrainCorp s 48203 at the Junee Roundhouse Power type Diesel electric Builder A. E. Goodwin under licence from American Locomotive Company …   Wikipedia

  • New South Wales 72 class locomotive — New South Wales 72 class Power type Diesel hydraulic Builder NSWGR Chullora Workshops Total produced 1 UIC classification B′B′ Gauge …   Wikipedia

  • New South Wales C36 class locomotive — New South Wales C36 class Preserved 3642 at Central railway station, Sydney, 12 September 2009 Power type Steam Builder NSWGR Eveleigh (10) …   Wikipedia

  • New South Wales Z12 class locomotive — 1210 in early 2006 Power type Steam Builder Beyer, Peacock Co. (34), Dübs Co. (26), Atlas Engineering Works (8) Serial number BP 1620–1637, 1675 …   Wikipedia

  • New South Wales D57 class locomotive — New South Wales D57 class 5711 stands in Junee yard ready to head north on 23 September 1961 Power type Steam Builder Clyde Engineering Total produced 25 …   Wikipedia

  • Queensland PB15 class locomotive — Queensland PB15 class PB15 No. 448 at Swanbank Power type Steam Designer Henry Horniblow and L. W. Piggott. Builder Evans, Anderson, Phelan Co. (70,) Ipswich workshops (1) …   Wikipedia

  • New South Wales 91 class locomotive — is a heavy duty locomotive of one of the operators on the New South Wales railways. It has a Co Co wheel arrangement. References RailPage Categories: New South Wales locomotives …   Wikipedia

  • New South Wales 41 class locomotive — New South Wales 41 class 4105 heads a Via Crucis special towards Campbelltown, Good Friday 1961 Power type Diesel electric Builder British Thomson Houston, UK Total produced …   Wikipedia

  • New South Wales 46 class locomotive — New South Wales 46 class 4615 locomotive at the Junee Roundhouse Museum Power type Electric Builder Metropolitan Vickers/Beyer Peacock …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”