Energy recovery ventilation

Energy recovery ventilation

Energy Recovery Ventilation is the process of exchanging the energy contained in normally exhausted building or space air and using it to treat the incoming outdoor ventilation air in residential and commercial HVAC systems. The benefit of using energy recovery is the ability to meet the ASHRAE ventilation & energy standards, while improving indoor air quality, and reducing total HVAC equipment capacity.

Methods of transfer

An Energy Recovery Ventilator (ERV) is a type of air-to-air heat exchanger that not only can transfer sensible heat but also latent heat. Since both temperature and moisture is transferred, ERVs can be considered total enthalpic devices. On the other hand, a Heat Recovery Ventilator (HRV) is limited to only transferring sensible heat. HRVs can be considered "sensible only" devices because they only exchange sensible heat.

Types of energy recovery devices

**Total Energy Exchange only available on Hygroscopic units

Rotary air-to-air enthalpy wheel

The rotating wheel heat exchanger is composed of a rotating cylinder filled with an air permeable material resulting in a large surface area. The surface area is the medium for the sensible energy transfer. As the wheel rotates between the ventilation and exhaust air streams it picks up heat energy and releases it into the colder air stream. The driving force behind the exchange is the difference in temperatures between the opposing air streams which is also called the thermal gradient. Typical media used consists of polymer, aluminum, and synthetic fiber.

The Enthalpy Exchange is accomplished through the use of desiccants. Desiccants transfer moisture through the process of adsorption which is predominately driven by the difference in the partial pressure of vapor within the opposing air-streams. Typical desiccants consist of Silica Gel, and molecular sieves.

Plate heat exchanger

Fixed plate heat exchangers have no moving parts. Plates consist of alternating layers of plates that are separated and sealed. Typical flow is cross current and since the majority of plates are solid and non permeable, sensible only transfer is the result.

Enthalpy plates were introduced 2006 by Paul, a special company for airing systems for passive houses. A crosscurrent countercurrent air to air heat exchanger built with a humidity permeable material.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Heat recovery ventilation — (also known as a heat exchanger, air exchanger or air to air exchanger) is a ventilation system that employs a counter flow heat exchanger between the inbound and outbound air flow. HRV provide fresh air and improved climate control, while also… …   Wikipedia

  • Ventilation (architecture) — Ventilation is the intentional movement of air from outside a building to the inside. It is the V in HVAC. With clothes dryers, and combustion equipment such as water heaters, boilers, fireplaces, and wood stoves, their exhausts are often called… …   Wikipedia

  • Energy development — Schematic of the global sources of energy in 2006 2007 …   Wikipedia

  • Energy Independence and Security Act of 2007 — Full title Energy Independence and Security Act of 2007 Enacted by the 110th United States Congress Citations Public Law …   Wikipedia

  • Energy policy of the United States — The energy policy of the United States is determined by federal, state and local public entities in the United States, which address issues of energy production, distribution, and consumption, such as building codes and gas mileage standards.… …   Wikipedia

  • Waste heat recovery —   Any conservation system whereby some space heating or water heating is done by actively capturing byproduct heat that would otherwise be ejected into the environment. In commercial buildings, sources of water heat recovery include… …   Energy terms

  • List of energy abbreviations — This is a list of abbreviations found in the context of energy issues. Contents: 0–9 A B C D E F G H I J K L M N O P Q R S T U V W X Y …   Wikipedia

  • Zero-energy building — BedZED zero energy housing in the UK A zero energy building, also known as a zero net energy (ZNE) building, Net Zero Energy Building (NZEB), or Net Zero Building, is a popular term to describe a building with zero net energy consumption and zero …   Wikipedia

  • Low-energy house — A thermogram compares the heat radiation of the windows and walls of two buildings: sustainable low energy passive house (right) and conventional leaking house (left) See also: Passive house A low energy house is any type of house that from… …   Wikipedia

  • Deep energy retrofit — A deep energy retrofit is a building retrofit approach that uses integrative design to improve the economics of efficiency and achieve much larger energy savings than conventional energy retrofits. Deep energy retrofits can be applied to both… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”