Ball turret

Ball turret

Infobox Weapon|is_ranged=yes


caption=
name=Sperry Ball Turret
type=
origin=
platform=Aircraft
target= Aircraft
design_date=
production_date=
service=
used_by= United States
wars=World War II
spec_type=
caliber=
part_length=
cartridge=
feed=
action=
rate=
velocity=
weight=
length=
range=

A ball turret was a particular form of aircraft gun turret mounted on aircraft during World War II. The most popular one was manufactured by the Sperry Corporation.

Variants

Sperry Ball Turret

The Sperry ball turret was used on both the B-17 Flying Fortress and the B-24 Liberator as well as the Navy's Liberator, the PB4Y. The Sperry ball turret was very small in order to reduce drag, and was typically operated by the shortest man of the crew. The gunner "sat" in the turret with their back and head against the rear wall, their hips at the bottom, and their legs held in mid-air by two footrests on the front wall. This left them positioned with their eyes roughly level with the two .50 calibre machine guns which extended through the entire turret. The cocking handles were located too close to the gunner to operate easily, so a cable was attached to the handle through pulleys to a handle near the front of the turret. Small ammo boxes rested on the top of the turret and the remaining ammo belts were stowed in the already cramped turret by means of an elaborate feed chute system. A reflector sight was hung from the top of the turret, positioned roughly between the gunners feet.

On the B-17 the turret was close to the ground, but had enough clearance for takeoff and landing. However, the gunner did not enter the turret until well into the air, in case of landing gear failure. In the case of the B-24 the tricycle landing gear placed the turret too close to the ground, so a hoist was used to lift the turret into the airframe. There was no room inside for a parachute, which was left in the cabin above the turret.

Erco Ball Turret

The Erco Ball Turret is the bow installation in the Navy PB4Y-1 and PB4Y-2 airplanes. It serves a double purpose in taking care of any bow attacks on the Liberator besides being used for strafing in anti-submarine warfare. Inasmuch as this turret is of the ball type, the gunner moves with his guns and sight in elevation and azimuth as he moves his control handles. It is a relative of the Martin 250SH Bow Turret of the PBM-3 airplane and has many points of similarity in design and action.

Popular culture

A ball turret features in the poem "The Death of the Ball Turret Gunner", by Randall Jarrell.

The father of T.S. Garp, the main protagonist in John Irving's fourth novel "The World According to Garp" (1978), is a severely injured ball turret gunner.

In the 2005 videogame the player is instructed to sit in the ball turret of the B-24 Liberator plane they are flying in the mission "Liberators."

In the 2003 videogame Secret Weapons Over Normandy, there's a mission in which the player has to shoot down Axis fighters from the B-17 Flying Fortress's ball turret.

See also

*Firearms
*List of firearms

External links

*http://carol_fus.tripod.com/ball_interior.html
*http://community.webshots.com/album/551442433VZhdGx
*http://www.geocities.com/milbios/perrisbio.html
*http://freepages.military.rootsweb.com/~josephkennedy/sperry_ball_turret.htm
*http://www.liberatorcrew.com/15_Gunnery/05_ball.htm


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • ball turret — noun : a usually retractable gun turret used on large combat aircraft and capable of being rotated so that a gunner may obtain a full circle of fire * * * ball turret, a gun turret in the shape of a ball or hemisphere, designed to project from… …   Useful english dictionary

  • The Death of the Ball Turret Gunner — is a five line poem by Randall Jarrell published in 1945. It is about the death of a gunner in a Sperry ball turret on a World War II American bomber aircraft. From my mother s sleep I fell into the State, And I hunched in its belly till my wet… …   Wikipedia

  • Turret lathe — Hartness 3x36 flat turret lathe with cross sliding head, equipped for bar work, 1910.[1] The turret lathe is a form of metalworking lathe that is used for repetitive production of duplicate parts, which by the nature of their cutting process are… …   Wikipedia

  • Consolidated B-24 Liberator — B 24 redirects here. For other meanings, see B24 (disambiguation). B 24 Liberator U.S. Army Air Forces Consolidated B 24D Liberator over Maxwell Field, Alabama …   Wikipedia

  • B-24 Liberator — Infobox Aircraft name= B 24 Liberator type= Heavy bomber manufacturer= Consolidated Aircraft caption= U.S. Army Air Forces Consolidated B 24D Liberator over Maxwell Field, Alabama. designer= Isaac M. Laddon first flight= 29 December 1939… …   Wikipedia

  • Boeing B-17 Flying Fortress — B 17 redirects here. For other uses, see B17 (disambiguation). B 17 Flying Fortress Boeing B 17E …   Wikipedia

  • Boeing B-17 Flying Fortress variants — Boeing B 17G Flying Fortress. The following is an extensive catalogue of the variants and specific unique elements of each variant and/or design stage of the Boeing B 17 Flying Fortress heavy bomber. For a broader article on the history of the B… …   Wikipedia

  • B-17 Flying Fortress — Infobox Aircraft name= B 17 Flying Fortress caption= This TB 17G was assigned various USAAF training commands type= Strategic bomber national origin = United States manufacturer= Boeing first flight= 28 July 1935cite web |url=… …   Wikipedia

  • Heavy bomber — A heavy bomber is a bomber aircraft of the largest size, and typically longest ranges. The term was used primarily prior to and during World War II, when engine power was so scarce that designs had to be carefully tailored to their missions. The… …   Wikipedia

  • Memphis Belle (film) — Memphis Belle Theatrical Release Poster Directed by Michael Caton Jones Produced by …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”