Motorcycle boot

Motorcycle boot
An engineer boot

Motorcycle boots are associated with motorcycle riders and range from above ankle to below knee boots They have an outside of a typical boot but a low heel to control the motorcycle. To improve motorcycle safety, motorcycle boots are generally made from a thick, heavy leather and may include energy absorbing and load spreading padding, metal, plastic and/or composite materials to protect the motorcycle rider's feet, ankles and legs in an accident. For use in wet weather, some boots have a waterproof membrane lining such as Gore-Tex or SympaTex.

Contents

Racing boots

A racing boot

Similar to touring boots, racing boots are designed for riding a motorcycle on hard pavement (either the street or a race track) and are usually between 10 and 14 inches in height and made from a combination of leather, metal, plastic and/or man-made composite materials to create a form-fitting, but comfortable boot. The amount of armored protection provided by racing boots is usually greater than touring boots due to the increased potential for injury at the high speeds needed for racing.

Depending upon how form-fitting the boot is, to allow a rider to easily get the boot on or off, the shaft may be designed to open lengthwise. If so, Velcro is typically used on the inner sides of the opening to allow the rider to close the boot over the foot, ankle and leg. This allows for some flexibility for the rider to control the boot's tightness. Some manufacturers also include an internal quick-lacing system between a soft inner leg and the harder outer shell of the boot shaft to further ensure a tight, but comfortable fit. The heel of a racing boot is typically very low: not more than 1/2-inch, and sole of the heel and foot is typically rather smooth. A curved plastic or composite plate may be included to cover the shin of the boot to protect the rider's shin.

The most common color of racing boots is black, but other colors such as white, red, blue, yellow and green may be combined with black or each other in some fashion. Typical street riders may prefer all black, but racers may opt for a color combination that matches the rest of their motorcycle leathers, helmet and/or motorcycle.

Touring / street boots

Touring boots by AXO

Similar to racing boots, touring boots are designed specifically for riding a motorcycle on hard pavement, but with less armored protection than racing boots since they are intended for riders that typically ride on city streets and highways, not race tracks. They are usually between 10 and 14 inches in height and made from a combination of leather, metal, hard rubber, plastic and/or man-made fabrics to create a form-fitting, but comfortable boot.

Depending upon how form-fitting the boot is, to allow a rider to easily get the boot on or off, the shaft may be designed to open lengthwise. If so, velcro is typically used on the inner sides of the opening to allow the rider to close the boot over the foot, ankle and leg. This allows for some flexibility for the rider to control the boot's tightness. Some manufacturers also include an internal quick-lacing system between a soft inner leg and the harder outer shell of the boot shaft to further ensure a tight, but comfortable fit. The heel of a touring boot is typically very low: not more than 1/2-inch, and sole of the heel and foot is typically rather smooth.

Unlike racing boots that are available in a wide variety of bright colors, touring boots are typically only black.

Motocross boots

Motocross boots are designed specifically for off-road, motocross (MX) or all-terrain vehicle riding. To help prevent a rider's feet and legs from being injured, motocross boots are typically much stiffer than regular motorcycle boots or racing boots, but are more flexible than ski boots by comparison.

A motocross boot.

Modern motocross boots are usually nearly knee-high (about 16 inches in height) and made from a combination of leather, metal, plastic and/or man-made composite materials to create a very form-fitting, comfortable and tight boot. To allow a rider to easily get the boot on or off, the shaft of a motocross boot is designed to open lengthwise. Multiple adjustable straps (usually 4 to 5) are deployed along the foot, ankle and shaft of the boot to allow the rider to tighten the boot to his/her preferences and comfort. Some manufacturers also include an internal quick-lacing system between a soft inner leg and the outer harder shell of the boot shaft to further ensure a tight, but comfortable fit. To protect the leading edge of the boot sole against rough terrain, a metal plate is usually screwed in place. The heel of a motocross boot is typically very low: not more than 1/2-inch. A curved plastic or composite plate covers the shin of the boot to protect the rider from debris that may be thrown from the front wheel of the motorcycle.

The most common colors of motocross boots are black or white, but other colors such as red, blue, yellow and green (possibly combined with black or white) are also available. Trick riders often opt to wear white boots as they are more most readily visible.

Police boots

Motorcycle cop boots are designed specifically to be worn by motorcycle cops. Very similar to riding boots, motorcycle cop boots are typically knee-high (between 18 and 21 inches in height), the foot and shaft are made from black, smooth-grained, high-gloss leather and the low-heeled sole is made from hard rubber. The boots are typically form-fitting and intended to be worn over breeches or jodhpurs as part of the motorcycle officer's uniform.

Engineer boots

Engineer boots are a long-established style of boots used by people in a number of occupations in addition to motorcyclists.

Harness boots

Wesco Harness Boots

Harness boots are very similar to engineer boots. The boots are most often made of heavy weight leather and range in height from short (10 inches) to extra high (38 inches). The most typical height is between 10 and 18 inches. The most common color is black, but brown harness boots are also made.

Harness boots are designed to protect the motorcycle rider from the heat of the exhaust pipes and the engine block and from injury to the foot and leg in the case of an accident while riding and may include a built-in steel toe cap and metal shank in the heel. Whereas engineer boots have a rounded toe, harness boots typically have a square toe. Unlike engineer boots that have an adjustable leather strap across the ankle, harness boots have a non-adjustable system of four leather straps and two metal rings: one strap goes across the top of the foot at the ankle, one strap wraps around the rear of the foot at the ankle and two more straps rise from sole on either side ankle. The four straps are held in place by the two metal rings that are located on either side of the ankle. Typically, these boots possess a pair of pull-straps on either side of the tops of the shafts. Some manufacturers replace these straps with an adjustable leather strap located on the outside top of the shafts, similar to engineer boots. Soles and heels are usually made of hard rubber and may either be relatively flat or may have lugs for increased traction.

Harness boots were originally modeled on the square toed boots prevalent in the 19th century, including those worn by American Civil War soldiers. Leather straps and rings were added to this style in the 1960s, creating the modern version of the harness boot, which quickly became a classic. Harness boots are popular among riders of Harley-Davidson and other motorcycles, among members of the heavy metal scene, and in the leather subculture.

See also


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Motorcycle cop boots — are a variety of motorcycle boot designed specifically to be worn by motorcycle cops. Very similar to riding boots, motorcycle cop boots are typically knee high (between 18 and 21 inches in height), the foot and shaft are made from black, smooth… …   Wikipedia

  • Motorcycle personal protective equipment — A motorcyclist wearing helmet, gloves, boots and leathers slides along a racetrack after crashing …   Wikipedia

  • Boot — A boot is a type of shoe that covers at least the foot and the ankle and sometimes extends up to the knee or even the hip. Most have a heel that is clearly distinguishable from the rest of the sole, even if the two are made of one piece.… …   Wikipedia

  • Motorcycle racing — Two motorcycles racing at Lydden Highest governing body FIM First played November 29, 1895 Characteristics Mixed gende …   Wikipedia

  • Boot fetishism — is very closely related to shoe fetishism. Many of the same sexual appeals regarded high heeled shoes apply to boots. In most cases the fetish of the boot is accompanied by a fetish for the material which it is made from. Examples could be… …   Wikipedia

  • Cowboy boot — Ad for Tony Lama featuring custom boots made for President Harry S. Truman. Cowboy boots refer to a specific style of riding boot, historically worn by cowboys. They have a high heel, rounded to pointed toe, high shaft, and, traditionally, no… …   Wikipedia

  • Combat boot — Black combat boots as worn by the Bundeswehr Sole of mode …   Wikipedia

  • Steel-toe boot — A pair of well worn steel toe shoes. A pair of ISO 20345:2 …   Wikipedia

  • Ammunition boot — Ammunition boots, also known as Boots, General Service (BGS), were the standard footwear for the British Army from the Victorian Era until the late 1950s. The term Ammunition boots comes from the boots unusual source; they were procured by the… …   Wikipedia

  • Chukka boot — Clarks desert boots Chukka boots or turf boots are ankle length boots with two or three pairs of eyelets for lacing.[1]They are usually made from calfskin or suede,[1] …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”