Three-point lighting

Three-point lighting

Three-point lighting is a standard method used in visual media such as video, film, still photography and computer-generated imagery. By using three separate positions, the photographer can illuminate the shot's subject (such as a person) however desired, while also controlling (or eliminating entirely) the shading and shadows produced by direct lighting.The "key light", as the name suggests, shines directly upon the subject and serves as its principal illuminator; more than anything else, the strength, color and angle of the key determines the shot's overall lighting design.

In indoor shots, the key is commonly a specialized lamp, or a camera's flash. In outdoor daytime shots, the Sun often serves as the key light. In this case, of course, the photographer cannot set the light in the exact position he or she wants, so instead arranges it to best capture the sunlight, perhaps after waiting for the sun to position itself just right.

The "fill light" also shines on the subject, but from a side angle relative to the key and is often placed at a lower position than the key (about at the level of the subject's face). It balances the key by illuminating shaded surfaces, and lessening or eliminating chiaroscuro effects, such as the shadow cast by a person's nose upon the rest of the face. It is usually softer and less bright than the key light (up to half), and more to a flood. Not using a fill at all can result in stark contrasts (due to shadows) across the subject's surface, depending upon the key light's harshness. Sometimes, as in low-key lighting, this is a deliberate effect, but shots intended to look more natural and less stylistic require a fill.

In some situations a photographer can use a reflector (such as a piece of white cardstock mounted off-camera, or even a white-painted wall) as a fill light instead of an actual lamp. Reflecting and redirecting the key light's rays back upon the subject from a different angle can cause a softer, subtler effect than using another lamp.

The "back light" (a.k.a. the "rim", "hair", or "shoulder" light) shines on the subject from behind, often (but not necessarily) to one side or the other. It gives the subject a rim of light, serving to separate the subject from the background and highlighting contours.

Back light or rim light is different from a kick in that a kick (or "kicker") contributes to a portion of the shading on the visible surface of the subject, while a rim light only creates a thin outline around the subject without necessarily hitting the front (visible) surface of the subject at all.

Four-point lighting

The addition of a fourth light, the "background light", makes for a four-point lighting setup.

The background light is placed behind the subject(s), on a high grid, or low to the ground. Unlike the other three lights, which illuminate foreground elements like actors and props, it illuminates background elements, such as walls or outdoor scenery. This technique can be used to eliminate shadows cast by foreground elements onto the background, or to draw more attention to the background. It also helps to off-set the single eye nature of the camera, this means that it helps the camera give depth to the subject.


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • three-point lighting — TV Basic lighting approach employing key, fill and back lights to illuminate subject withsense of depth and texture. Strategic placement imitates natural outdoor lighting environment, avoids flat lighting. (See back light, fill light, key light) …   Audio and video glossary

  • 3 Point Lighting — VP A common lighting set up featuring three lights; key light, fill light and hair light …   Audio and video glossary

  • 3 point lighting — FilmM traditional lighting setup using three lights. Key light, fill light, and hair light …   Audio and video glossary

  • Lighting — Not to be confused with lightning. For other uses, see lighting (disambiguation). Low intensity lighting and haze in a concert hall allows laser effects to be visible …   Wikipedia

  • High-key lighting — is a style of lighting for film, television, or photography that aims to reduce the lighting ratio present in the scene. This was originally done partly for technological reasons, since early film and television did not deal well with high… …   Wikipedia

  • Point shooting — is a method of shooting a firearm that relies on a shooter s instinctive reactions and kinematics to quickly engage close targets. Point Shooting does not rely on sights, but instead may place the gun below the line of sight, but in many cases… …   Wikipedia

  • Low-key lighting — is a style of lighting for photography, film or television. It attempts to create a chiaroscuro effect. In traditional photographic lighting, three point lighting uses a key light, a fill light, and a back light for even illumination. Low key… …   Wikipedia

  • Three-phase electric power — This article deals with where, how and why three phase is used. For information on the basic mathematics and principles of three phase, see three phase. Three phase electric power is a common method of alternating current electric power… …   Wikipedia

  • Lighting designer — The role of the lighting designer (or LD) within theatre is to work with the director, set designer, costume designer, and sometimes the sound designer and choreographer to create an overall look for the show in response to the text, while… …   Wikipedia

  • Point Theatre — For other uses, see The Point. For the rebranded venue, see The O2, Dublin. The Point Theatre (often referred to as the Point Depot or simply as the Point) was a concert and events venue in Ireland, that ran from 1988 2007, enjoyed by in excess… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”